|
|
|
|
|
|
EX-35 |
|
|
| Description:
Unique technology provides unmathed optical performance for Wide Angle and Long Range Detection in Multi-Level or Pet Alley Patterns, using the same lens surface. |
|
Specifications:
Detection Method: Passive Infrared, Coveragw: WIDE: 35ft. x 35ft. (11m x 11m) 85o Wide LONG: 55ft. x 5.5ft. (17m x 1.7m)Long Range, Detection Zones: WIDE: 64 zones/28 zones (Pet Alley) LONG: 12 zones/4 zones (pet Alley), Mounting Height: Normal 4~8ft(1.2
|
| Order |
|
|
| |
|
|
|
|
|
|
PIR 1510 |
|
|
Description:
Signal - Selective Processing TM ( SSP) Detection for optimum immunity to false alarms.
Unique circuit design protects against false alarms due to radio 0 frequency interference.
Vertical and horizontal aiming capabilities.
Dual - element sensor.
Large lens area assures high sensitivity.
Small filtering provides protection against transients.
Corner mountable.
Look Down Zone.
|
|
Specifications:
Coverage (I x W): 30' x 30' (9.1m x 9.1m) at 20oC (68oF), typical.
Operating Temparture: -10o to + 50oC (14o to 122oF)
Mounting: Wall or corner, 12' (3.6m) max.
Output: Normally - Closed Form - A Relay.
Relay Time: Approximately 3 seconds Contact Ratings. Alarm Relay: 100ma, 24Vc with internal 10Ω current - limiting resistor.
Power - Supply Requirements
Note: This unit is intended for operation from a power source that provides a 4 hour battery backup in the event of a power failure.
Filter Dc: 10.6 to 16Vdc nominal with battery backup from control panel.
Currinet Drain:
23mA (idle or alarm) at 12Vdc (niminal)
34mA (idle or alarm) at 12 Vdc (niminal)
Dimensions: 3.3" x 2.5" x 1.9" (8.4cm x 6.4cm x 4.8xm) (HxWxD)
Shipping Weight: 5oz (142gm)
|
| Order |
|
|
| |
|
|
|
|
|
|
PIR 1710 |
|
|
Description:
Lookdown zone provides coverage directly beneath sensor
Selectable Fixed (2 Pulse Bilpolar) or Signal Processing TM (SSP) Detection for optimum immunity false alarms
Unique circuit design protects against false alarms due to radio - frequency interference.
Vertical and horizonal aiming capabilities
Dual - element sensor
Large size with ample wiring space
Power filtering provides protection against transients
Corner mountable
|
|
Specifications:
Coverage (I x W): 70' x 60' (21.3m x 18.3m) at 20oC (68oF), typical.
Operating Temparture: -10o to + 50oC (14o to 122oF)
Mounting: Wall or corner, 12' (3.6m) max.
Output: Normally - Closed Form - A Relay
Relay Time: Approximately 3 seconds Contact Ratings
Alarm Relay: 100mA, 24Vdc with internal 10Ω current - limiting resistor.
Power - Supply Requirements:
Note: This unit is inteded for operating from power source that provides a 4 hour battery back up in the event of a power failure.
Filtered Dc: 23mA (idle or alarm) at 12Vdc (niminal)
Physical Dimentions: 3.3" x 2.5" x 1.9" (0.4cm x 6.4cm x 4.8cm) (HxWxD)
Shipping Weight: 5oz (142gm)
|
| Order |
|
|
| |
|
|
Fax
003 210 2827843
